3-way stand-mounted speaker
The BC1 was a 3-way bass reflex system intended to operate in a free-standing position. The cabinets were constructed from birch ply and it was available in teak, walnut, rosewood and black oak finishes.
The BC1A included a built in 25 or 50 watt amplifier. The BC1/3 was a later revised version using a 38mm HF/mid driver and a 19mm SHF driver. The BC1/69 was a limited edition, luxury, upgraded anniversary edition based on the original specification.
If you want to know more about the origin of the BC1, click here.
Cabinet dimensions
635mm x 300mm x 300mm
Cabinet weight
14 kg
Impedance
8 ohms nominal
HF Drive Unit
Coles 4001 G, Celestion HF 1300
LF Drive Unit
Spendor 200mm - 26mm coil
Sensitivity
84 dB for 1 watt at 1 metre (74 dB for 1 volt at 1 metre)
Crossover point
3 kHz and 13 kHz
Frequency response
50 Hz to 15 kHz
Pair matching
within 1 dB
Power handling
55 watts